Infocity, Bhubaneswar, Khordha
Duct Area Safety Nets nylon netting specification in Infocity, Bhubaneswar, Khordha
Nylon nets absorb impact well but need UV care in open sun. Spec here covers when nylon is preferred for sports or heavier containment versus UV-stabilised HDPE for static edges. In Infocity, Bhubaneswar, Khordha, Prevents objects falling the height of a service shaft and stops birds nesting in ducts where they cannot be cleaned out.


intentFocus
Nylon
Infocity enquiries about nylon usually need a measured opening first; nylon nets absorb impact well but need UV care in open sun. Spec here covers when nylon is preferred for sports or heavier containment versus UV-stabilised HDPE for static edges. Infocity is a commercial campus area where the work is predominantly duct and shaft netting on office blocks, programmed for weekends so that building services stay available on weekdays.

materials
Materials
| Material | Specification | Why it matters |
|---|---|---|
| HDPE duct netting | UV-stabilised HDPE, 1.2 mm to 2 mm twine, knotted | Chosen for its stability where a net will be left in place for years with little inspection, as duct nets always are. |
| Nylon catch netting | Braided nylon, higher denier, for intermediate catch layers | Where the net must arrest a genuinely heavy falling object, nylon's ability to absorb energy is what is needed. |
| Stainless anchorage | AISI 304 eye bolts, turnbuckles and border rope | Shafts are damp and poorly ventilated, so stainless is used throughout rather than galvanised hardware. |

localConditions
Local conditions in Infocity
Infocity is a commercial campus area where the work is predominantly duct and shaft netting on office blocks, programmed for weekends so that building services stay available on weekdays.
Commercial buildings shift the work away from balconies and towards service shafts, plant decks and facade containment. Those jobs are programmed outside business hours, need permits for at-height work, and have to leave designed access so building services can still be maintained afterwards.
A poorly ventilated shaft in a humid climate never really dries, and anything caught in the net becomes a mould site. We specify netting that does not retain water, keep panels tight so they drain, and make clearing caught debris the primary maintenance task rather than an afterthought.

benefits
What you get
- Nothing falls the full height
- Objects dropped into the shaft are caught at the nearest net rather than landing many floors below.
- Ends bird nesting in the shaft
- Closing the shaft head denies access outright, which is the only reliable way to stop roosting in a space nobody can clean.
- Cuts recurring cleaning cost
- Refuse and droppings stop accumulating at the shaft base, removing a job that facilities teams otherwise repeat every year.
- Protects the services in the riser
- Pipework and cabling in the duct stop being fouled by nesting material, which is a genuine fire and hygiene concern.
installation
How installation runs
1. Inspection
We inspect the opening in Infocity, note substrate condition, and flag access or association constraints before any material is ordered.
2. Measurement
Every bay is measured on site so the quotation matches the real opening, not a floor-plan guess.
3. Material selection
Grade, spacing, and hardware are chosen for local climate and use — HDPE duct netting or Nylon catch netting as specified on the quote.
4. Installation
Shaft dimensions, wall construction and safe access are established first; this is confined, at-height work.
Explore more
Related pages & topic clusters
Continue this service, compare nearby locations, or open a buyer guide — every cluster is unique to this page.
Free inspection, written quote, WhatsApp or call — pick the next step.
- Free site inspection
Book a twenty-minute survey.
- Get quote
Send opening photos and your city.
- Request callback
We call back with system options.
- Contact team
Talk to a planner before you decide.
Conversion
Ready for a free site inspection?
Send a photo, book a callback, or call the team — we reply with the right system options for your opening.
Questions about Duct area nets in Infocity, Bhubaneswar, Khordha

Is duct Area Safety Nets in Infocity measured on site?
Yes — we measure the opening in Infocity, note substrate and access (including notes for Infocity: Infocity is a commercial campus area where the work is predominantly duct and shaft netting on offic…), then write grade and spacing into the quotation.
What climate factors matter for Infocity?
In Infocity, damp seasons matter as much as wind when choosing mesh and checking tension later.
Do you cover openings near Infocity Square in Bhubaneswar?
We use Infocity Square only as an orientation cue — the install address still needs a PIN and floor. Coverage follows surveyed Bhubaneswar localities, including Infocity.
What should a fair Infocity estimate include?
Compare measured area, material grade, spacing, access/labour, and finish. Avensafe does not publish a single Infocity rate per square foot because openings and access differ.
How long does installation take in Infocity?
On-site time is usually 4–16 hours after measurement, subject to Infocity lift slots or street access.
Can you publish a rate per square foot?
We deliberately do not, because a single rate would be misleading. The same area costs very different amounts depending on the grade of hardware, the spacing you need, the height you are working at and the condition of the substrate. Our pricing guide sets out every factor that moves the number so you can see how a quotation is built up.
Why do quotations for the same balcony differ so much?
Almost always because the specifications are different, even when the dimensions are identical. Cable grade, cable spacing, net polymer and the type of anchor used all change the cost substantially and none of them are visible in a photograph. When comparing quotations, check the stated grade and spacing rather than the total alone.
Should I wait until after the monsoon to have work done?
Not necessarily, though it depends on the job. Cable and net installations can be fitted in the wet season without difficulty. Facade covering and anything involving foundations is better scheduled outside it. Where we do install during the monsoon we will normally return once the season ends to re-tension, since that is when any slack appears.
Is there a cheaper specification that is still safe?
Sometimes. Moving from 316 to 304 stainless is a genuine saving and perfectly sound at an inland address, and a coarser mesh is fine if you only need to keep birds out. What we will not do is reduce cable spacing tolerance or anchor quality, because those are the two things that decide whether the installation actually holds.
If you net our duct, how do we service the pipes later?
Access has to be designed in from the start, which is why we form laced access panels at agreed positions and record where they are for the facilities team. A net with no access provision gets cut open the first time the riser needs work and is never repaired, which defeats the whole installation.
What warranty do you provide?
Warranty depends on the product, and the figure for each one is stated on its service page rather than promised generically here. In every case the warranty covers materials and workmanship on what we installed, and it assumes the yearly inspection is carried out. We will always tell you what is and is not covered before you commit.
Do you actually cover my area, or only the main city?
We cover the localities listed on our service area pages, and those lists reflect where we genuinely operate rather than everywhere we would like to. If your locality is not listed, call us anyway: we often work just beyond a listed boundary, and we will tell you plainly if a job is outside our reach rather than sending someone unprepared.
Our shaft is full of nesting material. Is that included?
Clearing is quoted separately because the volume varies enormously, but it is not optional. Netting over an existing nest traps the problem instead of solving it and is inhumane besides. We clear and photograph the shaft before any panel goes in, and agree disposal arrangements with the building management first.
How long does an installation take?
A cloth hanger is usually done in an hour or two. A single balcony safety net takes two to six hours, and an invisible grill on one or two bays takes most of a working day. Larger jobs such as sports enclosures or building covering run to several days because foundations and scaffold have to be dealt with first.
Do you need to visit before giving a price?
For anything structural we do, yes. We can give an indicative range over the phone from your balcony dimensions, but the final price depends on the condition of the wall or slab we are fixing into, the access route for materials, and the exact spacing you need. A survey takes about twenty minutes and means the quotation we give you is the price you pay.
Our work
Project gallery — Duct Area Safety Nets in Infocity, Bhubaneswar, Khordha
Installation photography from comparable openings — used to judge finish quality before you book a survey.
Next step
Still comparing options? Ask a specific question
Tell us the opening type, floor, and what you are trying to solve. We point you to the right system page or book a survey when you are ready.

All services in Infocity
Every service below has its own page for Infocity — open any to compare systems.

Photo → WhatsApp estimate
Send a clear photo of the opening in Infocity, Bhubaneswar, Khordha
One wide shot and a close-up of the fixing surface are enough to confirm coverage, suggest the right system, and outline what should appear on a written quotation before you book a survey. Firm totals still follow measurement on site.
- ✓ City / PIN in the message
- ✓ Priority: kids, birds, view, or monkeys
- ✓ Rough width × height if known
- ✓ Floor / society access notes
- Photo estimate on WhatsApp
- Written quotation after survey
- Named material grades
- Eight-state coverage

