Duct Area Safety Nets heavy-duty specification in Bengaluru, Karnataka

Yes — we measure the opening in Bengaluru, note substrate and access, then write grade and spacing into the quotation.

Upper floors around Bengaluru need tension and access planning before materials are cut.

We use Cubbon Park only as an orientation cue — the install address still needs a PIN and floor. Coverage follows surveyed Bengaluru localities, including Bengaluru.

Compare measured area, material grade, spacing, access/labour, and finish. Avensafe does not publish a single Bengaluru rate per square foot because openings and access differ.

On-site time is usually 4–16 hours after measurement, subject to Bengaluru lift slots or street access.

Only if the enclosure was left with a gap, which in practice means a corner or a service penetration that was not properly closed. A correctly fitted net denies access outright. That is why we clear existing nesting material first and check corners and pipe penetrations last, since those are where birds actually get through.

Clearing is quoted separately because the volume varies enormously, but it is not optional. Netting over an existing nest traps the problem instead of solving it and is inhumane besides. We clear and photograph the shaft before any panel goes in, and agree disposal arrangements with the building management first.

A cloth hanger is usually done in an hour or two. A single balcony safety net takes two to six hours, and an invisible grill on one or two bays takes most of a working day. Larger jobs such as sports enclosures or building covering run to several days because foundations and scaffold have to be dealt with first.

Warranty depends on the product, and the figure for each one is stated on its service page rather than promised generically here. In every case the warranty covers materials and workmanship on what we installed, and it assumes the yearly inspection is carried out. We will always tell you what is and is not covered before you commit.

Almost always because the specifications are different, even when the dimensions are identical. Cable grade, cable spacing, net polymer and the type of anchor used all change the cost substantially and none of them are visible in a photograph. When comparing quotations, check the stated grade and spacing rather than the total alone.

We deliberately do not, because a single rate would be misleading. The same area costs very different amounts depending on the grade of hardware, the spacing you need, the height you are working at and the condition of the substrate. Our pricing guide sets out every factor that moves the number so you can see how a quotation is built up.

Sometimes. Moving from 316 to 304 stainless is a genuine saving and perfectly sound at an inland address, and a coarser mesh is fine if you only need to keep birds out. What we will not do is reduce cable spacing tolerance or anchor quality, because those are the two things that decide whether the installation actually holds.